Concept of waste engine oil:
In engine oil is mixed with moisture, dust and other impurities, or
oil gradually metamorphism/go bad, generated the organic acid,
colloid and asphalt content etc.
Waste Oil Distillation Plant can treat a variety of waste lube oil
and get high quality base oil and a small amount of gasoline and
diesel through vacuum distillation. After pretreatment, waste oil
pumped into the distillation kettle, heating to working
temperature, and then we can get the base oil, gasoline and diesel
When reaction complete, stop heating and remove residue from the
bottom of the tank, then the machine can be used again. The
production cost is low, but the base oil is high quality. This is
the most advanced technology in the world in the waste oil
recycling line and suitable for large-scale industrial production.
Operation Process of Waste Engine Oil Distillation Plant
Oil temperature at 70 ~ 120 degrees before is gasoline and coal
tar, 180 ~ 380 degrees is diesel, the remaining is heavy oil.
2. Acid cleaning
- Chemicals: concentrated sulfuric acid/H2So4 (92%~98%)
- Usage: accounts for 6% ~ 8% of waste engine oil volume
- Function: remove the colloid, asphalt content and other impurities
in the waste engine oil.
- Steps: mix 6% ~ 8% sulfuric acid slowly under stirring, after that,
continue to stir for half an hour, and then let stand for 2 ~ 3
hours, remove acid slag automatically.
3. Alkaline cleaning
- Chemicals: soda ash/Na2Co3
- Usage: accounts for 5% of waste engine oil volume
- Function: Remove the remnant of vitriolic acid by organic acid
cleaning and neutralize acid cleaning in the used oil.
- Steps: mix 5% soda ash slowly under stirring, after fully stir
evenly, then let stand for 1 ~ 2 hours, then use PH test paper to
check acid and alkaline neutral, then let stand for 2 ~ 3 hours,
automatically remove the alkaline slag.
4. Activated clay adsorption
- Chemicals: activated clay
- Usage: accounts for 3.5%~ 5% of waste engine oil volume
- Function: Remove bad color in waste engine oil.
- Steps: mix 3.5%~5% activated clay slowly under stirring, after
that, continue to stir for half an hour, and then let stand for 1 ~
2 hours, remove bad color automatically, we could get diesel
Customer Visit from Different Country
Pyrolysis oil distillation plant- Our special service:
- Professional and detailed product introduction for you, such as
photos, price, technical date, payment, delivery time, shipment and
- We have running machine in our factory, welcome to visit our
factory. we hope our customer know more details about our machine
- After bought our machine, we could supply 1 year warrantly. During
the time any question our engineers will help you solve the problem
at the first time.
- Our engineers will install for you and provide the detailed
training until the machine operate successfully.
Why choose us:
Romiter Group are committed to manufacture pressure vessel,
pyrolysis and distillation machine for 5 years. Our factory has
complete experience and technology to complete your order. Our oil
distillation plant is environmental friendly and energy saving,
which make sure customer can use it anywhere.